工作內容】
- 負責電驅總成在臺架上的測試與調試,確保產品性能符合設計標準;
- 參與整車集成測試,分析并解決電驅系統在不同工況下的運行問題;
- 協助制定測試方案,編寫測試報告,提供技術支持與數據支持;
- 與研發、生產團隊緊密協作,推動產品優化與改進。
【任職要求】
- 本科及以上學歷,車輛工程、電氣工程或相關專業;
- 3年及以上電驅系統或整車測試相關工作經驗,有外資車企背景優先;
- 熟悉電驅總成結構及工作原理,具備良好的數據分析和問題解決能力;
- 具備較強的責任心和團隊協作精神,能適應高強度工作節奏。
? Vehicle Preparing
? Align with test owner on target HW&SW requirements;
? Work with VM colleague to place PiT order to achieve the requirements and car inspection; and align with workshop in-advance to ensure the work above can start and end in time as planed;
? Proceed inbound/outbound, or procurement for related parts;
? When PiT work start, track and coordinate with WS on it; and report progress to test owner;
? Double confirm test vehicle HW/SW situation when preparing work done; provided short test report to China test owner;
? Run the car to check equipment and date measurement; get demo measurement and share it with test owner;
? Following test car usage policy of company, arrange vehicle shipping and receiving between company and test place on planned date;
? To confirm PG access for planned test duration; to work on PG access for responsible car when necessary.
? SW / Coding flash
o To flash eATS/eDrive/Transmission/Powertrain SW or Variant Coding as required;
o Do adaptions, error cleaning and shorttest reading before and after flash;
o Document short test report and share on system.
? Vehicle Test Implementation
? Align tasks and required test cases with China test owner proactively before test, to get the required test cases;
? Before operation, it is essential to review and get to know steps, and pass criteria of each case (for unsure or unclear cases, clarify it timely and proactively with China and German test owner; note the clarified case instruction ). While, it is not a must to finish all cases’ reviewing before initiating tests; may start with reviewed cases.
? Finish test cases implementation (T1 license needed, possible to travelling to Proving Grounds), result analysis, and documentation before planned date; and update status on system timely;
? For non-pass cases, work with China test owner, to proactively drive issue resolution and communicate with German test owner to clarify possible next steps, and update the status on system; once any limitation, or any influence on release conclusions be confirmed, to document it, and inform China test owner and the team.
? To review and make sure all assigned test cases are conducted, measured and documented; approval with or without limitations (if any) are confirmed and given by test owners.
? Maintenance of the vehicle during test (do QT, charging, camouflage), trouble shooting if vehicle has any issue to block the test.
? Issue investigation
? Issue analysis, align with defect manager about the topic and execution the analysis on vehicle or dyno;
? Report and documents related executions and measurements to defect manager.
Enabler
? Software: DTS
? Software: IPEmotion
? Software: CANape
? Hardware: Working Station
? T1 driving license + IDIADA C+ license
? HV2
? English
? Qualification training for measurement and correlation measurement