国产三级网站在线观看-免费国产白袜踩踏视频区-免费黄片视频大全在线观看-97精品人妻无码在线视频

General description of the position:
崗位總體描述:
1.Responsible for new product process design, related tooling equipment development, process document preparation, product trial production follow-up, trial production process problem identification and analysis, participate in problem review and put forward improvement suggestions
負責新產品工藝設計，相關工裝設備開發，工藝文件準備，產品試制跟進，試制過程問題識別和分析，參與問題評審并提出改善建議；
2. Responsible for the process design of mass products, mass production line development, tooling equipment development,
process control planning, preparation of mass production process documents, second-party and third-party audit response, and process abnormal analysis.
負責量產品的工藝設計，量產產線開發、工裝設備開發，過程控制規劃，量產工藝文件準備，二方、三方審核應對，過程異常分析。
Responsibilities:
主要職責:
? New product manufacturing feasibility review and process suggestions
新品制造可行性評審和工藝性建議
? Responsible for the trial production of new prototypes, small batch trial production, and summarize the problems that arise, and review and propose
負責新品樣機試制、小批量試制，并對出現的問題進行匯總，評審提出
? Estimate costs and make continuous improvements to drive cost reduction actions. Understand how production processes, equipment and systems operate to identify and implement energy efficiency improvement opportunities.
估算成本、持續改進以推動成本降低行動. 了解生產流程、設備和系統的運作原理，以識別和實施能源效率的改進機會
? Launch of new production lines
新產線啟動相關工作
? Research and introduction of new processes, new materials and new equipment, test and verification of new processes and new materials
新工藝、新材料、新設備研究及引入，新工藝、新材料的試驗驗證
? New product capacity evaluation, process route setting, production line layout planning
新品產能評估、工藝路線設定、產線布局規劃
? Identification of new product tooling, tools and equipment, preparation of equipment specification book, equipment demand proposal, and monitoring of tooling progress
新產品工裝、工具、設備識別，設備式樣書的編制，設備需求提出，工裝進度的監控
? Acceptance of the equipment and tooling
設備工裝的主導驗收
? According to IATF16949, prepare and modify new product process documents, and lead the implementation of documents.
根據IATF16949對新品工藝文件編制、修改，并主導文件的落地實施
? Responsible for the trial production of engineering prototypes to verify the production process and product quality, timely coordinate the technical problems existing in the trial production, and carry out product failure analysis and positioning.
負責工程樣機試生產，以驗證生產工藝及產品品質，及時協調試生產中存在的技術問題，進行產品的故障分析和定位
? Follow up the trial production process of new products and grasp the progress as planned, establish and improve the process
documents of new products, summarize the problems of the prototype process and form a list of trial installation plans.
跟進新產品試產過程并按計劃把握進度,建立并完善新品的工藝文件，匯總樣機過程問題形成試裝方案清單
? Equipment capability analysis, process capability analysis, and feedback to the responsible person for timely disposal according
to the analysis results
設備能力分析，過程能力分析，并根據分析結果反饋責任人及時處置
? Mass production process planning, production line plan determination, standard working hours formulation, material quota statistical analysis determination.
量產工藝規劃，產線方案確定，標準工時制定，物料定額統計分析確定
? Maintenance of MES/work center/routing
MES系統、SAP工作中心、工藝路線的維護
? Identity the list of auxiliary material, the design of error-proofing
輔料清單和用量的識別，防錯系統的建立
? Responsible for the maintenance and publicity of mass production process documents, the first process training for operators, mainly including process flow chart, PFMEA, control plan, operation instructions, special characteristics list, production operation preparation confirmation form, etc.
負責量產工藝文件的維護和宣導，對作業員進行首次工藝培訓，文件主要包括過程流程圖、PFMEA、控制計劃、作業指導書、特殊特性清單、生產作業準備確認表等
? Follow up the adjust status of new production line and lead to solve the issues during production.
新產線調試跟蹤，及時記錄和協調處理產線試生產過程中的問題
? Identification and formulation of process improvement plan after mass production, proposal and improvement of equipment tooling transformation
量產后工藝改進方案的識別和制定，設備工裝改造的提出和改進
? Analysis of the causes of product quality problems after mass production and formulation of countermeasures to prevent re-issuance.
量產后產品質量問題的原因分析和再發防止對策的制定
? Equipment demand identification and preparation, equipment plan research, equipment selection
設備需求識別和編制，設備方案的調研，設備選型
? Inspection of process discipline
工藝紀律的檢查
? Docking with customers with process requirements and production technology
與客戶進行工藝要求和生產技術的對接
? Responsible for production line SPC and related data analysis and SPC plan preparation
負責產線SPC及相關數據分析和SPC計劃的編制
? Responsible for the identification of environmental factors and hazard identification, evaluation, and control planning of the department
負責本部門環境因素識別和危險源辯識、評價和控制策劃
? Develop and implement corrective/preventive actions relevant to the department.
制訂和落實相關本部門的糾正/預防措施
? Implement the operation and control of the department's environment and occupational health and safety, and do not conduct illegal command.
落實本部門環境和職業健康安全的運行控制工作，不進行違規指揮
? Attend information security protection training and comply with company information security protection policies.
參加信息安全保護培訓，遵守公司信息安全保護相關政策。
任職要求:
? Bachelor’s degree or above
本科及以上學歷
? More than three years of experience in process design and process maintenance in passenger car or parts related industries
三年以上乘用車整車或零部件相關行業工藝設計、工藝維護相關經驗
? Familiar with IATF16949 or VDA6.3 system requirements, able to use APQP, PPAP, FMEA and other quality tools; Basic knowledge of mechanical or electrical or electronic and drafting ability (CAD drawing, etc.); Lean manufacturing and IE knowledge background；familiar with data analyze.
熟悉IATF16949或VDA6.3體系要求，能夠運用APQP、PPAP、FMEA等質量工具；有機械或電子電氣專業基礎及制圖能力（CAD制圖等）；精益生產及IE知識背景,有數據統計分析能力
? Familiar with energy management principles and methods, able to identify and drive improvements in energy performance in the production process.
熟悉能源管理原則和方法，能夠在生產工藝中識別和推動能源績效的改進
? Strong principle, clear logic, meticulous and rigorous, strong execution and strong communication skills
原則性強、邏輯清晰、細致嚴謹、執行力強、溝通能力強
? Must have the awareness of information security protection.
必須擁有信息安全意識